News
Civil Aviation
Pilot Training
Flight School Analysis
Aviation Jobs
Training
Services
About Us
Contact Us

US DOT Inspector General Launches Audit Of FAA Oversight Of Aircraft Manufacturers

Picture of Aviation Today News Desk

Aviation Today News Desk

US DOT Inspector General Launches Audit Of FAA Oversight Of Aircraft Manufacturers
US DOT Inspector General Launches Audit Of FAA Oversight Of Aircraft Manufacturers
Image: Boeing

Washington, United States: The US Department of Transportation (DOT) Office of Inspector General (OIG) announced on November 20, 2026, that it is initiating an audit of the Federal Aviation Administration’s (FAA) oversight of aircraft manufacturers and their suppliers.

The audit, identified as Project No. 27A3003A000, will assess the effectiveness of the FAA’s oversight of manufacturers’ quality assurance systems for both domestic and foreign suppliers. The announcement was issued through a memorandum dated November 20, 2026, from Marshall E. Jackson, Assistant Inspector General for Aviation Audits, to the Director of the Office of the Administrator, Audit Management.

The OIG stated that the audit will examine the FAA’s oversight of aircraft manufacturers’ quality assurance systems, with the objective being to evaluate the effectiveness of its supervision of suppliers. The agency said, “Our objective will be to evaluate the effectiveness of FAA’s oversight of aircraft manufacturers’ quality assurance systems for domestic and foreign suppliers.”

The decision follows previous findings of shortcomings in the FAA’s oversight of aircraft and aircraft-parts manufacturers, including Boeing and its manufacturing processes. The OIG cited a National Transportation Safety Board (NTSB) investigation into a January 5, 2024, incident involving a Boeing 737-9, in which the aircraft’s mid-exit door plug detached during flight, causing a sudden cabin decompression.

The investigation identified deficiencies in Boeing’s quality assurance processes and ineffective FAA oversight of the company’s business process instructions for parts removals. The OIG also referred to its October 9, 2024, report on FAA oversight of Boeing’s production processes, which found that FAA inspectors had not ensured suppliers conducted First Article Inspections. These inspections determine whether suppliers can produce parts that meet manufacturers’ design requirements from the outset.

Under federal law, the FAA is authorised to oversee entities responsible for controlling the design and quality of aviation products, articles and parts. These entities, known as Production Approval Holders (PAHs), include holders of production certificates, parts manufacturer approvals and technical standard order authorisations. They are responsible for ensuring that supplier-provided parts and services meet their requirements, while the FAA oversees their compliance.

FAA regulations and guidance also require manufacturers to maintain an FAA-approved quality control system for their suppliers.

The OIG noted that the FAA has recently updated its risk assessment practices for overseeing manufacturers, introduced a new tracking system for manufacturer oversight and announced plans to revise the model used to assess PAH risks. These developments, alongside previously reported oversight issues, prompted the watchdog to initiate the audit. Its last report specifically examining FAA oversight of aircraft manufacturers’ suppliers was published in 2008.

The OIG plans to begin the audit in December 2026 and will contact the FAA’s audit liaison to arrange an entrance conference. The work will be conducted at FAA headquarters, regional offices and other locations to be determined during the audit.

Leave a Comment

Subscribe to our Newsletter

Recent News

Aviation Today Perspectives